By allowing Antec to reduce your problem
areas, you increase your firm's versatility, reputation, repeat
business, and profitability. The Stage line of spot dryers manufactured
by Antec is the right step at the right time.
Competitively priced, all Stage I through Stage IV units are available
in panel sizes 16 x 16 and 18 x 24. Antec utilizes state of the art,
high mass, infra-red panels with no hot spots - a real plus in
consistency and reliability. There's more, - read on as Antec sets the
Stage for you!
Stage I Spot Dryer...
incorporates your most needed features at a very reasonable investment.
Keeping within Antec's standards of quality and dependability, the Stage
I utilizes a durable sturdy stand with double locking height adjustment.
Leg levelers compensate for any floor variation while our exclusive
control rod allows effortless panel rotation. Just push/pull the handy
rod to pivot your Stage I over the print platen with no extra steps! A
great benefit when you're doing all the work. Let's face it - manual
shouldn't mean difficult to operate. When comparing cost, value, and
production the Stage I cannot be beat!
Stage II, the economical features...
of Stage I with Antec's through panel superheated forced hot air system.
Unlike other brands that distribute air around the panel, the Antec
Stage II goes the extra step. Up to 390 holes are precisely located and
drilled in each infra - red panel.
Through these holes up to 100 cubic feet per minute of filtered
superheated air is forced directly down through the panel onto the
platen. This superheated forced air greatly increases your productivity
while dramatically reducing any scorching or burning. This feature is of
great importance when flashing and/or curing puff, nylon, or water based
inks. Tight, fine line registration, light inks on dark garments, multi
color jackets, bumper stickers..... The Stage II will make your life
easier.
Stage III increases your production...
Stage III takes the Stage I manual/ infra red models and increases your
production through automation. Considerable time has been spent testing
various designs. Through this research we've developed a very production
oriented cycle-dwell-return pattern. Foot pedal actuated, the Stage III
panel will rotate over the platen and remain (dwell) from 0 to 60
seconds. The dwell is adjusted according to your current production
requirements. After the dwell has elapsed, the panel automatically
returns to its initial (or start) position. To cycle simply press and
release the foot pedal - the panel rotates over the platen, dwells, then
returns to the initial position. Another feature on the Stage III is our
exclusive "quick return". At any time during the dwell/cure
period you may override the cycle by depressing the foot pedal. This
returns the panel to the start position for the remainder of the dwell
period, resetting itself for the next cycle - another Antec Stage III
exclusive!
Stage IV produces the maximum product.
Stage IV incorporates the revelant features available in Stages I - III
producing what our customers believe to be the ultimate product. Stage
IV combines the high mass infra red panel, automatic panel rotation and
forced, through panel, superheated air. The result? A truly versatile,
production oriented flash dryer. Stage IV is a problem solver, working
wonders on plastisol, water base, nylon, and puff inks. Superheated air
reduces scorching and greatly increases production through reduced flash
dwell periods. Our efficient and technically advanced panels cure with
no hot spots giving you improved confidence in your final product as
well as assisting in keeping your customers coming back. Stage IV - all
of the best for less than the rest.
|